It is always such a pleasure to hear from Yazaki-san, he is such a gracious and kind gentleman, and he has more good audio ideas in a day than most of us do in a year!

I have a fascinating multi-part story of serendipity and intrigue to relate to you about Today's Fresh Catch, the Spec RSP-AZ9EX Real Sound Processor, that Yazaki-san custom built for me to try with my vintage Altec 832A Corona loudspeakers.

It turns out that about two years ago, in a parallel audio universe, that Yazaki-san had recommended to Alan-san a pair of vintage Altec 832A Corona loudspeakers as being a good match for the vintage Marantz Model 7 preamplifier and PX25A SET amplifier that Yazaki-san had modified, and built, respectively, for Alan-san.

Unaware of Yazaki-san's recommendation of a pair of vintage Altec 832A Corona loudspeakers to Alan-san a couple of years ago, in a moment of serendipity I also bought a pair of vintage Altec 832A Corona loudspeakers from LA Jazz Audio, purveyors of fine vintage audio equipment, back in February of 2018.

I absolutely adore my vintage Altec 832A Corona loudspeakers, they're extremely musical, have cabinets that were beautifully crafted for Altec by fine furniture builders Glenn of California, and while still being large loudspeakers they handily fit into room corners so they are very unobtrusive where space is at a premium.

My vintage Altec Corona loudspeakers' components compliment are the 803A bass drivers (1947-1958), 802D compression drivers (1957-1972), 811B HF horns, and N800E crossovers, which puts their production circa 1957-1958, so they are about the same age as me at 60 years old, but unlike me they are in mint condition!

Yazaki-san modified Alan-san's vintage Marantz Model 7 according to the modifications Yazaki-san detailed in his seven-part series of articles about modifying his beloved Marantz Model 7, My Adventure With My Old Model 7 (Part 1, Part 2, Part 3, Part 4, Part 5, Part 6, and Part 7). Is it a coincidence that Yazaki-san's article about the Marantz Model 7 has 7 parts? I think not!

Yazaki-san also built a beautiful PX25A (DA30) SET stereo amplifier for Alan-san, just like the one he uses in his home system (a mono example of Yazaki-san's stereo PX25A is shown above), providing Alan-san a home hifi system that is very similar in nature to what Yazaki-san uses at home.

As a final touch Yazaki-san built Alan-san some custom impedance compensators (i.e. Real Sound Processors) for his vintage Altec Coronas, which Alan-san reported as being very complimentary.

I received a care package yesterday from Yazaki-san containing some wonderful goodies! The first being some excellent Japanese green tea to relax with while listening to music, and Yazaki-san's custom RSP-AZ9EX's for my vintage Altec 832A Corona's!

Yazaki-san also sent me a wonderful treasure he found in his literature collection, a booklet titled, "Altec Lansing, Speaker Units & Enclosure Drawings".

Yazaki-san told me, "I don't remember well, but I got the booklet at the audio fair in Japan around the end of 70's or early 80's. It was published by the distributor of Altec products at that time, named "Electori", which survives until now!'

Inside this wondrous booklet are the cabinet drawings of Altec drivers, horns, and loudspeakers, including the Corona's - what a treasure!

Here's some close-ups for you to enjoy ...

I'll have much more to tell you about Yazaki-san's design considerations of the custom Spec RSP-AZ9EX Real Sound Processors for my Vintage Altec 832A Corona's, as well as listening impressions when I get them installed on the Corona's!

Many thanks to Yazaki-san for such a wonderful care package - you're the best!

Just for the fun of it, let me conclude with a photo and email message from Yazaki-san!

I'll have much more to say on this adventure with Yazaki-san's custom Spec RSP-AZ9EX Real Sound Processors for my Vintage Altec 832A Corona's, and until then, thanks for stopping by and may the tone be with you!